There are two manners of construction, or building strategies, when it comes to adding a deck to the back of your home.
Basically, a deck can be free-standing, or attached to the house. Either way, both types of deck provide a home with the living space to host such basic necessities as a barbecue, ice cooler, and of course the standard plastic or steel tubing furniture on which to relax, discuss, and solve world issues. And, there will be no issues regarding size of living space, railing systems, or number of descending tiers and platforms, due to your deck being attached or self-standing.
However, there are slight advantages to using one system, over the other. The biggest advantage of an attached deck is stability. Generally, attached decks don’t sink or tilt. This is due to the fact that our building code, when it comes to attached decks, will require you to first install buried piers, in order to support the beams, which in turn support the joists and framework. Buried piers will require you having to dig big holes, since these piers will require 24-28 inch wide footings, dug about 54 inches below grade.
Unless you’ve been exercising your back by performing 500 lb. deadlifts three times per week, the task of digging a series of holes this wide, and deep, is best performed by a backhoe. If you’re unfamiliar with this type of heavy machinery, backhoes are to your lawn what a few raccoons are to an unprotected bag of trash put out the night before garbage day.
So, there’s the lawn devastation factor to deal with if you invite one of these fine, big boy toys onto your property. However, attached decks also have the advantage of being more easily modified into gazebos, or three season sun rooms. This is because the footings and piers, and the ledger boards (bolted to the home’s foundation), are all resting, or attached to, concrete that is sitting on undisturbed soil, and below the frost line.
So, if you’re looking at a deck for now, but maybe an enclosed area in the not so distant future, consider attaching the deck to the home. Self-standing decks cozy up to the house like a fellow on his first date with a gal at the movies. The advantage of a self-standing deck is that it’s adaptable. The ledger board of an attached deck provides a secure anchor for the joists and frame work, but it’s got to be fastened to something solid. Many homes have vinyl or composite sidings that extend well under the patio door, leaving little foundation to work with in order to install a ledger board. Or, pipes and duct venting that are usually found at the rear of the home, often interfere with the proper fastening or alignment of a ledger board. Also, some homeowners may not feel comfortable drilling into a brick or stone façade, or having to remove existing siding in order to find the necessary studs in which to bolt the ledger board.
So, for all those folks we have the self-standing deck. Because a self-standing deck is basically a large table, it requires at least four legs. If the deck is any larger than 12 feet, or the maximum span of a triple 2×10 beam, you’re going to require at least a second, or third beam. More beams will of course require more supporting legs (6×6 posts). But, that’s what happens with a self-standing deck. Without the house being relied on to supply support, you’re going to need more legs. Now, a self-standing deck can be pier supported, or simply float. Floating decks are riskier for newer homes because the 6-8 feet of ground that extends out from the foundation, has yet to fully settle. As a result, the weight of a deck will surely have a couple of the deck legs sinking slightly. Older homes (15-20 yrs.) have surrounding soil that’s had plenty of time to settle, providing a solid base for a floating deck.