Because door and window casings, as well as baseboards, account for about 90 per cent of the finishing trims in a typical home, let’s look at how to effectively choose a casing and baseboard.
First, and not so much a rule, but more of a general recommendation, don’t be shy to go big. In fact, buying casings and baseboards is kind of like ordering popcorn and pop before taking your seat at the movie theatre. A small drink and medium sized bag of popcorn may seem sufficient when presented to you, but once in your seat, the drink’s gone in moments, while the popcorn inevitably gets eaten during the movie prelims, leaving you with nothing but a dry mouth, and un-popped kernels to munch on during the feature film.
Back in the olden days of home building, generally referred to as the frugal 1970’s and 80’s, where disposable incomes were put towards the purchase of polyester leisure suits in anticipation of hitting the discotheque Saturday night, a standard casing of 2-1/8 inches in width, was paired with a very modest 3-1/8 inch tall baseboard. Today, casings are a standard 2-3/4 inches wide, and get combined with a 3-7/8 to 4-1/8 inch baseboard, which seems heavy enough, especially if you’re renovating a 1970’s styled home, or grew up surrounded by those somewhat diminutive 70’s moldings.
Regardless, even though the standard casing and baseboard sizes have gotten larger, people should really be looking to duplicate what was put in the grander homes of the early 1900’s. With casings measuring anywhere from 4-6 inches wide, along with 8-10 inch baseboards, this generation definitely new how to finish a home, and how to dress up for the weekend. Recommendation, go with the ‘Jumbo’ sized bag of popcorn, and two-litre ‘Big Gulp’ every time.
Translated into moldings, custom home builders, as opposed to those building rental units, should consider using at least a 3-1/2 inch casing, along with a 5-1/2 base. Again, when comparing moldings in your local building supply centre, these casings and baseboards may look a little big at first glance, but don’t despair, the hesitancy you’re experiencing is due to your familiarity of being handed a medium bag of corn and small pop since infancy, when you really merited the Jumbo and Big Gulp.
How do you pick a casing and baseboard? These types of moldings form part of a series of either Colonial, Victorian, modern, or Contemporary styles, with casings generally having a matching base to partner up with. So, depending on the home and interior door style, a person would be directed towards one of these particular series of moldings.
Once a style or series of casings and baseboards has been decided on, it’s then time to experiment. Because each series of casings and baseboards will have a number of profiles to choose from, the most effective way of picking one over the other is to have a few chosen baseboards butt up against their matching casings, while both moldings lay on the store’s floor. This way, you can stand back and better evaluate all the pairings. Try to avoid comparing moldings by standing or leaning them up against whatever wall, or racking is available. It’s our experience that when a bunch of casings and trims get leaned up against something, either the moldings or the something gets bumped, with the whole mix toppling over. When things are laid out on the floor, they’ve got nowhere to fall. Laying the casings and baseboards out in this manner also allows you to add a back-band trim (casing enhancing molding), various quarter round moldings, or to mix and match the various styles and sizes, in a much more effective manner.
The only one rule to keep in mind when matching moldings is that the casing must always be thicker than the base, and the base always wider than the casing. Enjoy choosing your Jumbo and Big Gulp moldings.