If your home made it through the fall months without incurring any flooding damage due to power failures, general mishaps, or acts of nature, then congratulations, your home’s water dispersal system is seemingly in good working order.
However, fall weather to a home is kind of like Japan showing up to face Team Canada in pre-tournament Olympic hockey. In other words, the ol’ homestead has yet to be truly challenged. A few days of rain, perhaps a little snow, combined with maybe a heavy downpour of leaves, is usually all the fight you’re going to get out of October and November, and, relatively nothing compared to what’s coming this March.
Besides having long been the heartbreak month for Maple Leaf fans, as they helplessly watch their team play themselves out of playoff contention, March has also earned the reputation as the month for basement heartbreak. This due to after months of sweat, blood, tears, and expense put into a basement renovation, the odds favour an exhausted homeowner waking up some morning in the month of March, to a just installed floating composite floor, actually floating, in about four inches of water.
What happened? Well, the various weak spots in your home’s drainage system were working well enough to handle a little rain, but when it came to diverting the water from those banks of melting snow and ice, the systems obviously fell well short of the task.
So, if you’re planning on turning your basement into extra living space this winter, let’s look at how to avoid heartbreak this spring.
First, if your home’s basement floor is below the water table, thereby requiring you to have a sump pit, and accompanying sump pump, in order to collect the water surrounding the foundation, and pump it clear of the home, get a second pump. When one little bobble floating up and down a thin steel shaft is all that protects your $20,000 basement renovation from disaster, it’s time to re-evaluate your risk management.
Sump pumps can jamb, get clogged, or just stop working. So, invest in a second pump, two bobbles are definitely better than one. Plus, have this second pump tie into your water line. This way, you’re not depending on electrical power, or a backup battery (that requires a constant trickle charge) to power the pump, it’ll all be done by the existing water pressure in the line.
Call your local plumber in order to have this job done properly.
Next, let’s check the foundation, and make sure those systems designed to properly divert rain and snow melt away from your home are intact. Checking the foundation means essentially looking for cracks. Whatever the size of a crack, be it hairline, or severe, they’re all potentially problematic, allowing water into the home, while further deteriorating your foundation. Cracks can be temporarily covered, or filled, with a pre-mixed, just add water, hydraulic cement powder. The next step, if weather, and your skill set will permit, would be to cover these repairs with parging, a thin coat, smooth finishing compound that you see on most finished foundations.
Next, if you’ve got window wells, cover them. Window wells collect water and deposit it against the foundation wall, basically the two things you absolutely want to avoid. Easy to install, clear plastic “flip up” covers can be ordered to size, are durable, and lightweight, allowing any basement dwellers to easily escape in an emergency.
Next, clean your eavestroughing, and, make sure those downpipes are depositing rain water at least five feet from the home, not into your weeping tile. Back in the olden days, it was thought efficient to run the downpipe straight down into the weeping system. We now realize this strategy unnecessarily overburdens the drain pipe with water and various debris.
Finally, grade the landscape so that rain and snow melt flow away from the home, with a slope of at least one inch per foot for the first ten feet.